|
|
| "TO BREATHE OR NOT TO BREATHE" |
| The Choice Is Yours, with the POLAR SEAL
Elastomeric Acrylic Roofing System. POLAR SEAL gives you
the choice of building a breathing membrane or a waterproof
membrane in select areas of any roof. Liquid application
for versatility of design with spray, brush, or roller. |
| APPLICATION PROCEDURE |
| The POLAR SEAL SYSTEM is made by applying
two different water based acrylic plastic emulations onto
new sheathing or an existing roof. In most applications,
the first product applied to build the "POLAR SEAL
ROOFING SYSTEM" is Prime Security. The Roof Coating is applied
to establish a vapor barrier and waterproof membrane.
Prime Security prevents or stops existing rust on metal,
and stops migration of oils in asphalt products. For high
tensile strength, a fiberglass mat is installed in the
Prime Security Emulsion during application. The second
and final product is Top Security. It is a very bright
white reflective heat shield that uses a high concentrate
of Titanium Dioxide to reflect the ultra violet rays of
the sun. This prevents heat buildup in the roof as well
as the structure's interior. We have broken down the steps
in more detail below for our Roof Coatings: |
| POLAR
SEAL Prime Security |
100% adhesion to substrate:
> stops oil migration
in asphalt
> sets base for water-proofing
or fiberglass applications
> apply 1-1&1/2
gal. per square.
|
| Chopped Strand
Fiberglass Mat |
Install where high tensile strength
is needed:
> increases fire retardation
> used in flashing &
repair areas.
> tensile strength approximately
1925 lbs. psi per mat application.
> Mat weight 4.68
lbs. per square.
|
| POLAR SEAL
Prime Security 2nd Coat |
This forms a waterproof membrane and
encapsulates the fiberglass.
> apply 1&1\2-2
gal. per square on fiberglass - or -
1-1&1\2
per square without glass
|
| POLAR SEAL
Top Security |
Creates a homogenous bond to Prime
Security:
> Titanium Dioxide for
Superior UV barrier, heat reflection
> non-chalking
> Mildew and fungus resistant
> crack resistant
> low temp. flexibility
> Long term durability
> apply 1-1&1\2
gal. per. square.
|
| POLAR
SEAL Top Security 2nd Coat |
This will fill any voids
in the first coat and build a membrane for protection
which will provide a longer service life.
> apply 1-1&1\2
gal. per square.
|
|
| APPLICATION SURFACES |
| A non-inclusive list of the
many surfaces that POLAR SEAL can be applied to includes:
Asphalt, Asphalt Shingles, Rolled Roofing, Coal Tar, New
or Rusted Metal, Wood, Plywood, Waferboard, Brick Crete,
Concrete, Tile, Aluminum, Beadboard, Styrofoam, Urethane
Products, Asbestos Shingles, and other warm dry surfaces. |
|
